
INSECTICIDES
![]() |
![]() |
![]() |
METHOMYL 1% Z-9-tricosene 0.05% Aversive agent 0.002% (Ref. Moscacid) |
PROPOXUR 2% Z-9-tricosene 0.10% Aversive agent 0.01% (Ref. Moscacid Ultra) |
AZAMETHIPHOS 1% (Z)-9-tricosene 0.10% Aversive agent 0.01% (Ref. Moscacid 3) |
IMIDACLOPRID 0.5% (Z)-9-tricosene 0.10% Aversive agent 0.01% (Ref. Zapi Imidacloprid) |
![]() |
![]() |
![]() |
![]() |
|
TECHNICAL FEATURES | The bait is based on:
|
|||
The formulation of GRANULAR FLY BAIT can be used in 3 ways: 1 - ready for use bait; 2 - dissolved in water to be used with pressure pumps; 3 - dissolved in water to be used as “wall painting” solution. |
||||
ACTION | Contact and ingestion. The insect, attracted by the sugary granules and the sex pheromone contained in the bait, licks them and gets rapidly poisoned. |
|||
WHERE TO USE | Household and civil places, farms and livestock sites such as stables, hen houses, pigsties, etc. (before application remove animals from the areas to be treated and take all necessary measures to avoid feeding stuff contaminations) | |||
READY TO USE GRANULAR BAIT |
Spread the granular bait on containers such as trays, dishes, etc. The granules must be uniformly spread and placed on high places such as shelves, windowsills, walls, etc. 100 g of product are usually enough to treat a surface of 50 m2. |
|||
SOLUTION FOR PRESSURE PUMPS |
Dissolve 100 g of product in 100 ml of water. Apply the solution on not-porous surfaces where usually insects nest (walls, ceilings, doors and windows jambs, beams, fencings, floors, etc.) by the means of pressure pumps. | |||
WALL PAINTING SOLUTION |
Dissolve 100 g of product in 50 ml of water. Apply the solution on not-porous surfaces where usually insects nest (walls, ceilings, doors and windows jambs, beams, fencings, floors, etc.) by the means of paintbrushes or brushes. | ![]() |
![]() |
POT | BAG | CAN | SQUARE BUCKET |
ROUND BUCKET |
![]() |
![]() |
![]() |
![]() |
![]() |
|
25 g | BO_11 | ||||
50 g | BO_13 | ||||
100 g | BO_13 | VA_06 | |||
200 g | FL_07 | VA_06 | |||
400 g | FL_08 | ||||
500 g | FL_08 | VA_05 | |||
5 kg | SE_14 | ||||
10 kg |
SE_07 | ||||
15 kg |
SE_01 |
![]() |
DELTAMETHRIN 2.5% SC (Ref. Deltakill Flow 2.5) |
DIFLUBENZURON 10% SC (Ref. Dival) |
TECHNICAL FEATURES | Adulticide | Larvicide |
Long lasting residual action | IGR | |
WHERE TO USE | Household and civil places, indoors and outdoors. |
Sewage, dung-hills, manure-pits, dumps, etc. |
DOSAGE & USE INSTRUCTIONS |
25-50 ml of product each 10 litres of water. The obtained suspension can treat a surface of 100-150 m2 |
300-400 ml of product each 100 litres of water. The obtained suspension can treat 40 m2 |

![]() |
BOTTLE IN BOX | BOTTLE | TANK |
![]() |
![]() |
![]() |
|
100 ml | AS_10 | ||
500 ml | FL_02 | ||
1 lt | FL_03 | ||
5 lt | TN_01 |
![]() |
CYPERMETHRIN 8% TETRAMETHRIN 1% PIPERONYL BUTOXIDE 15% (Ref. Tetracip Zapi) |
CYPERMETHRIN 10% (Ref. Cipekill EC) |
PROPOXUR 10% CYPERMETHRIN 5% PIPERONYL BUTOXIDE 10% (Ref. Prokur K) |
BENDIOCARB 10% PERMETHRIN 6% PIPERONYL BUTOXIDE 12% (Ref. Perk) |
TECHNICAL FEATURES |
|
|
|
|
Very effective on species of insects resistant to pyrethroids thanks to the combination of two active ingredients belonging to different chemical groups. | The product is characterised by the combination of two active ingredients belonging to different chemical groups it grants a vary good effect on insects having developed resistances. | |||
WHERE TO USE |
|
|||
SOLUTION FOR PRESSURE PUMPS |
100-200 ml each 10 litres of water. 1 litre of the obtained solution to treat 15 m2 | 100-200 ml each 10 litres of water. 1 litre of the obtained solution to treat 10 m2 | 50-100 ml each 10 litres of water. 1 litre of the obtained solution to treat 20-25 m2 |
|
ULV APPLICATION |
For ULV (ultra low volume) applications: dosage of 5% (500 ml for 10 litres of water). 1 litre of the obtained solution, to treat 2500 m3 or 1000 m2. For thermal fogging applications: dosage of 4% to be diluted in glycol or other suitable solvent (indoors: 0.8-1 litre of the obtained solution each m3; outdoors: 1.5 litres of solution each hectare; sewer systems: dilute in suitable solvent 30-40 ml of product to treat 1000 m3). |
/ |
PACK | INNER PACK |
PACK SIZE | CYPERMETHRIN 8% TETRAMETHRIN 1% PIPERONYL BUTOXIDE 15% |
CYPERMETHRIN 10% | PROPOXUR 10% CYPERMETHRIN 5% PIPERONYL BUTOXIDE 10% |
BENDIOCARB 10% PERMETHRIN 6% PIPERONYL BUTOXIDE 12% |
![]() |
Bottle | 25 ml | AS_09 | AS_09 | ||
100 ml | AS_10 | AS_10 | AS_10 | AS_10 | ||
![]() |
- | 250 ml | FL_21 | FL_21 | FL_21 | FL_21 |
500 ml | FL_02 | FL_02 | FL_02 | FL_02 | ||
1 lt | FL_03 | FL_03 | FL_03 | FL_03 | ||
![]() |
- | 5 lt | TN_01 | TN_01 | TN_01 | TN_01 |
25 lt | TN_02 | TN_02 |
![]() |
CYPERMETHRIN 0.24% DELTAMETHRIN 0.03% PIPERONYL BUTOXIDE 0.31% (Ref. Tetracip Zapi pronto uso<) |
TECHNICAL FEATURES | Water-based ready-to-use insecticide |
|
|
WHERE TO USE | Paths, courtyards, outside walls, pavements, outdoor places in general, floors walls, ceilings, gree areas such as tree-lined paths hedges, lawns and ornamental bushes, etc. |
USE INSTRUCTIONS | It can be sprayed by means of manual or pressure pumps. Advised dosage: 1 litre of product each 30-40 m2 of surface to be treated. |
INDICATIONS FOR PROFESSIONAL APPLICATIONS | Whe applied with ULV (ultra llow volume) devices, use 1-1.5 litres of product each 500-600 m3 to be treated. |
If applied by the meas of micronizers or thermal fogging devices, apply 2-3 litres of product each hectare to be treated. |

![]() |
TANK | TANK | RTU BOTTLE |
![]() |
![]() |
![]() |
|
500 ml | FL_14 | ||
750 ml | FL_13 | ||
5 lt | TN_01 | ||
10 lt | TN_04 |
AZAMETHIPHOS 10% Aversive agent 0.002% |
|
![]() |
|
TECHNICAL FEATURES | Long-lasting action |
It can be used in 3 ways: 1 - ready for use dustable powder; 2 - dissolved in water to be used with pressure pumps; 3 - dissolved in water to be used as "wall painting" solution. |
|
ACTION | Contact and ingestion |
WHERE TO USE | Stables, breeding farms for indoor and outdoor use. |
DOSAGE & USE INSTRUCTIONS |
As ready for use powder: apply 120-150 g each 50 m2 of surface to be treated. As solution to be used with pressure pumps: dissolve 250 g of product into 2 litres of water. With the obtained solution, you can treat 50 m2 of floor or 100 m2 of wall. As "wall painting" solution: dissolve 200 g of product in 200 ml of water. With the obtained solution, you can treat 100 m2 of floor or 200 m2 of wall. |

![]() |
POT | ROUND BUCKET |
![]() |
![]() |
|
500 g | VA_07 | |
5 kg | SE_09 |